24 hours a day, 7 days a week Same-day service when the schedule allows
MA HIC #212677 Insured
Text us (978) 758-0690
Search the site

Try: , ,

Text Us (978) 758-0690 Call Book online Book
Service

Garage Door Tune-Up and Maintenance
in Massachusetts.

A tune-up visit: a 21-point safety inspection, lubrication of the rollers, hinges, springs and bearings, a spring tension check, sensor alignment, hardware tightening, and opener force and travel adjustment. Any repair the door needs is a separate job with its own written price.

Reviewed by Eric Murray, owner, MA HIC #212677. Prices as of . Updated .

Pricing
$149-$249
Prices as of
Time on site
About 1 hour
Scheduling
By appointment
Warranty
1 year labor
Book online Call for maintenance
What's included

Every maintenance call gets the same checklist.

  • 01 Full door inspection
  • 02 Lubrication of all parts
  • 03 Spring tension check
  • 04 Safety feature testing
  • 05 Track alignment check
  • 06 Hardware tightening
Prices

What a garage door tune-up costs

Of the 70 invoiced jobs listed on this site, 27 included maintenance. Three were tune-up visits with no other work; on the other 24, maintenance was done on a visit where other work was being done.

The tune-up line in our price book reads: "21 point safety inspection, lubrication of rollers, hinges, springs and bearings, spring tension check, sensor alignment, hardware tightening, opener force and travel adjustment. Total price, no service call fee." The other work done on the same visits is listed further down.

One tune-up visit
$149
Two-visit yearly plan
$249 a year
Two tune-ups, spring and fall, plus 10% off repairs and priority scheduling for 12 months.

Prices from our 2026 price list. A repair the door needs is a separate job with its own written price, done only if you approve it. Every repair is on our full price list.

From our job records

Recent garage door tune-up and maintenance jobs

Tune-up visits

  1. October 2026 Clinton

    A service call that became a tune-up: lubrication, the hardware tightened and the spring tension adjusted.

  2. October 2026 Andover

    Tune-ups on two doors: a safety inspection, lubrication of the rollers, hinges, springs and bearings, a spring tension check, sensor alignment, hardware tightening and force and travel adjustment.

  3. September 2026 Dracut

    Tune-ups on two doors: a safety inspection, lubrication of the rollers, hinges, springs and bearings, a spring tension check, sensor alignment and hardware tightening.

Maintenance on a visit with other work

The newest 6 of 24.

  1. November 2026 Harvard

    A new pair of high-cycle torsion springs with new cones, the door rebalanced and safety-tested, with lubrication and adjustment on the same visit.

  2. October 2026 Reading

    Two LiftMaster 6580L belt-drive openers, 1 HP with battery backup, a 360-degree camera and Wi-Fi, ceiling-mounted with the old openers hauled away and the remotes, keypad and app programmed, plus a wireless entry keypad, with lubrication and adjustment on both doors.

  3. October 2026 Concord

    A door that had come off its track, put back on its rollers and serviced on the same visit.

  4. October 2026 West Newton

    A new pair of extension springs with safety containment cables, pulleys and sheaves, rebalanced and safety-tested, with lubrication and adjustment on the same visit.

  5. October 2026 North Reading

    An opener that would not stop beeping: reprogrammed and adjusted, with the door lubricated.

  6. October 2026 Peabody

    An opener installation that had been started finished off, with the force and travel set, then a full tune-up: safety inspection, lubrication, spring tension check, sensor alignment and hardware tightening.

Finished, invoiced jobs from our Jobber records. We leave out customers' names and street addresses.

From the invoices

Work done on the same visit

Maintenance alongside other work

Our price book has its own line for maintenance done that way: "Lubrication, spring tension and opener adjustment on a visit where other work is being done."

The other work on those 24 visits, from the invoices. One visit can be in more than one row.

  • New springs (seven jobs): Harvard, November 2026, West Newton, October 2026, Maynard, September 2026, Dunstable, September 2026, Boxford, September 2026, Dracut, July 2026 and Andover, July 2026.
  • New lift cables (four jobs): Maynard, September 2026, Boxford, September 2026, Shrewsbury, August 2026 and Andover, July 2026.
  • Door sections reinforced (six jobs): Chelmsford, September 2026, Fitchburg, September 2026, Lowell, August 2026, Andover, July 2026, Arlington, July 2026 and Chelmsford, June 2026.
  • Track work (three jobs): Lexington, August 2026, Shrewsbury, August 2026 and Andover, August 2026.
  • Opener adjustment or repair (four jobs): North Reading, October 2026, Braintree, October 2026, Fitchburg, September 2026 and Andover, August 2026.
  • New rollers (one job): Dracut, July 2026.
  • New seals (three jobs): Marlborough, October 2026, Chelmsford, September 2026 and Cambridge, July 2026.
  • New openers (three jobs): Reading, October 2026, Peabody, October 2026 and Boxford, September 2026.
  • Other repairs (three jobs): Concord, October 2026, Tyngsborough, October 2026 and North Andover, September 2026.
Between tune-ups

What to watch for between tune-ups

Once a month
Test the auto-reverse, which every opener manual must tell you to do. Lay a 2x4 flat on the floor in the middle of the doorway and close the door with the wall button: the door must reverse when it touches the board. If it does not, stop closing the door with the opener and see opener repair.
The door feels heavy or hangs crooked
Stop using it and leave the springs and cables alone: they hold the door up under tension. See spring replacement and cable repair.
Grinding, rattling or shaking as it moves
Usually worn rollers: see roller replacement.
The door rubs, jerks or stops partway
Usually a bent or loose track: see track repair.
Daylight, water or leaves under the closed door
Usually a worn bottom seal: see weatherstripping and seals.

Source: 16 CFR 1211.16, the safety instructions every opener manual must carry (eCFR)

Photos

Garage Door Tune-Up and Maintenance on the job.

After a Tune-Up, Clinton
Short Panel, Windows, After a Tune-Up
Section Hinge
Top Roller Bracket

See more of our work

What customers say

Reviews that read like
a thank-you note.

5.0
on 14 Google reviews

52 reviews across Google, Thumbtack, Angi, Facebook and Yelp. See every profile.

"I highly recommend Eric, we had him fix our garage door few months ago, recently we were having some issues with it. I called Eric on the weekend and he immediately answered the phone, and came within an hour to our place to fix it. I was extremely impressed about how responsive and thorough professional Eric is."
Basharat Sheikh Google Review · Aug 2025
"Eric was able to help me out on a super cold Monday holiday recently. He was able to diagnose my issue and get my garage door working again. Price was fair and he was very good at providing some insight into things to keep an eye on moving forward. I'll definitely keep him on speed dial for whatever I run into next."
Bob North Attleborough, MA · Jan 2025
"Our technician Eric came on time gave a more fair price then we were previously quoted from another company and did the job quickly and thoroughly and now our door is working better then ever (even got rid of that annoying clicking noise we used to have)."
SebiiCeleb Google Review · Oct 2025
Where we do it

Garage Door Tune-Up and Maintenance by town

Middlesex County

Not listed? We cover 152 towns. See every town we serve.

FAQs · Maintenance

Quick answers before you call.

How much does a garage door tune-up cost?

One tune-up visit is $149: the total price, with no service call fee. Any repair the door needs is a separate job with its own written price, done only if you approve it.

Is there a yearly maintenance plan?

Yes. The yearly plan is $249 for two tune-ups, spring and fall, plus 10% off repairs and priority scheduling for 12 months.

Does a tune-up include new parts?

No. A tune-up is inspection, lubrication and adjustment. A part that needs replacing is a separate repair, priced in writing and done only if you approve it: torsion spring replacement is $475-$1,200, extension spring replacement $325-$750, cable repair $200-$400 and roller replacement $150-$300.

Ready when you are

Let's get your door working again.

Whether your door is stuck or you need an estimate for a new install, call, text, or request service online. Call for urgent repairs and to confirm the next available appointment.

Book online Call (978) 758-0690
24 hours a day, 7 days a week. Book or text to request service
Call Book online